Power

Datastream | Convert | ProcessBook
 

Voice Mail Instructions

small logo

As of yesterday, the Mesquite Power voicemail system has been upgraded. (Most of the changes will only affect the managers.) Here are the instructions for setting up and accessing your voicemail:

To Setup:

dial 333 from any phone in the Administrative Building (except the cordless phones) enter * 2#  twice

the system will ask you for a password, which you will change in the setup

dial 9 and your extension

enter 0327

The system will walk you through the setup, remember 1 = Yes        2 = No

NOTE: At the end of the setup, it is very important that you do not hang up until the system asks you to confirm your new voicemail by entering 1.

Jay 251
Jim 252
Dave 253
Russ 254
Steve K. 255
Mike Catania 256
Ed 257
Troy 258
Jeff Z. 260
Linden 263
Ray 264
Henry 265
Pat 267
Bob 269
Mark 271
Doug 272
Bill 273
Debbie 274
George 275
Warren 277
Ches 278
Jeff J. 279

To Access:

dial 333 from any phone in the Administrative Building (except the cordless phones) enter * 2#  twice

Dial 9 and your above extension

enter your password

New features:

More time has been allotted for those leaving messages so they do not get cut off. You can redirect a call to someone else's voicemail by pressing 2 anytime during the message, then 1, then the extension of the person.

If you have any questions, please let me know,

Heather

About Us | Email Settings | Policy Manuals | Email Control Room